#Simpson sds drop in setting tool full#
#Simpson sds drop in setting tool code#

#Simpson sds drop in setting tool full#

When properly set, four indentations will be visible on the top of the anchor indicating full expansion.

Attach the SDS Drop-In setting tool to a drill, Drive expander plug towards the bottom of the anchor using only hammer mode until the shoulder of the setting tool makes contact with the top of the anchor.

Insert the anchor into the hole, tap with hammer until flush against the surface.

Overhead installations do not need to be blown clean. Then blow the hole clean of dust and debris with compressed air.

Drill the hole to the specified embedment For fixed-depth bits drill the hole until the shoulder of the bit contacts the surface of the base material. Drill a hole in the base material using the appropriate diameter carbide drill bit of fixed-depth bit.Minimum thread engagement should be equal to the nominal diameter of the threaded insert. When properly set, four indentation will be visible on the top of the anchor indicating full expansion Using the designated Drop-in setting tool, drive expander plug towards the bottom of the anchor until the shoulder of the setting tool makes contact with top of the anchor.Tap with hammer until flush against the surface. Simpson Strong-Bolt 2 Wedge Anchors Simpson SDS Screws Drop-In Anchors. Overhead installations do not need to be blown clean. Simpson Titen BoltsAnchor features carbon steel construction and mechanically. Then blow the hole clean of dust and debris using compressed air. For fixed-depth bits drill the hole until the shoulder of the bit contacts the surface of the base material. Drill the hole to the specified embedment. Drill a hole in the base material using the appropriate diameter carbide drill but or fixed-depth.Hand and power setting tools are available for fast, east and economical installation.

Positive-set marking system indicates when anchor is properly set.New design offers easy installation than previous drop-in anchor design.OVERSIZED HOLE WILL REDUCE THE ANCHORS LOAD CAPACITY

#Simpson sds drop in setting tool code#

DIAB anchors feature a positive-set marking indicator at the top of the anchor, Helping you to see more clearly when proper installation has taken place.ĬONSULT THE CURRENT CODE REPORTS FOR APPLICABLE LOAD VALUES The displacement-controlled expansion anchors are easily set by driving the plug toward the bottom of the anchor using either the hand or power setting tools. Improved geometry in the preassembled expansion plug improves the setting capability so the anchor installs with 40% less hammer strikes than previous Drop-In anchors. Simpson Strong-Tie introduces a redesigned Drop-In anchor that provides easier installation into base materials. When properly set 4 indentations will be visible on the top of the anchor indicating full expansion.Simpson Strong-Tie DIAB50 1/2' Drop-In Anchor Drive expander plug towards the bottom of the anchor using only hammer mode until the shoulder of the setting tool makes contact with the top of the anchor. Attach the SDS Drop-In setting tool to a drill.When properly set 4 indentations will be visible on the top of the anchor indicating full expansion. Using the designated Drop-In setting tool, drive expander plug towards the bottom of the anchor until the shoulder of the setting tool makes contact with the top of the anchor.Overhead installations need not be blown clean. For fixed depth bits drill the hole until the shoulder of the bit contacts the surface of the base material. Drill a hole in the base material using the appropriate diameter carbide drill bit or fixed depth bit as specified.Fixed-depth stop bit helps you drill to the correct depth every time.Hand- and power-setting tools available for fast, easy and economical installation.Lipped drop-in version available for flush installation.New design offers easier installation than previous drop-in anchor design – sets with fewer hammer hits.This expansion anchor is easily set by driving the plug toward the bottom of the anchor using in hand or power-setting tools. The improved geometry in the expansion plug improves setting capability. The Simpson Strong-Tie 1/2 Inch Lipped Drop-In Anchor with 5/8 Drill Bit Diameter provides easy installation into base materials. Simpson Strong-Tie 1/2 Inch Lipped Drop-In Anchor with 5/8 Drill Bit Diameter